Shopping Cart

What is it

• This is a development board from Espressif Systems, based on the module ESP32‑S3‑WROOM‑2‑N32R16V. (DigiKey)

• It combines a powerful microcontroller (MCU) with built-in wireless (Wi-Fi + Bluetooth) plus exposed I/O, USB, and other interfaces — useful for prototyping, IoT, wearables, embedded systems, and “smart-device” projects. (espressif.com)

Key Specs & Features

• MCU: Dual-core Xtensa LX7, running up to 240 MHz. (Cirkit Designer)

• Memory: 32 MB Flash + 16 MB PSRAM (on WROOM-2 N32R16V module). (espressif.com)

• Wireless: Wi-Fi 802.11 b/g/n (2.4 GHz) and Bluetooth 5.x (BLE). (DigiKey)

• Interfaces / I/O: Multiple GPIOs exposed — supports SPI, I²C, I²S, UART, PWM, ADC, DAC, USB OTG, etc. (ESP32s.com)

• USB / Connectivity: On-board USB (for power, flashing, debugging). (espressif.com)

• Power / Voltage: Operates at 3.3 V (regulated), powered via USB (5 V in → 3.3 V reg). (TME)

• Form Factor: Small development board; breadboard- and prototyping-friendly (standard pin-header layout). (ESP32s.com)

What It’s Good For

• IoT / Smart-device projects: Great for building Wi-Fi / BLE enabled devices — smart home gadgets, sensors, remote controls, etc.

• Embedded / edge projects with moderate to heavy computing needs: Dual-core CPU + good RAM/Flash + PSRAM helps in more demanding tasks (e.g. sensor fusion, data logging, lightweight ML/AI, real-time processing).

• Rapid prototyping / development: Easy to plug in, program (USB + UART), and interface with external sensors/modules due to broken-out GPIOs and many communication interfaces.

• Flexible connectivity: Because of Wi-Fi, BLE and USB support, suitable for remote/wireless deployments as well as USB-based development/debugging.

Things to Keep in Mind / Possible Limitations

• Even though board offers “lots of resources,” it’s still an MCU — not a full-fledged computer. For very heavy workloads (e.g. large neural nets, image/video processing) it may not suffice.

• If you connect many peripherals, be mindful of power limits and proper supply (some modules need stable supply + attention to PSRAM usage).

• For certain advanced features (or if you need real-time reliability), you may need to configure power, memory, and partition scheme carefully (especially when you use PSRAM and external peripherals).

Who Should Use This — And Who Might Prefer Something Simpler

Best for:

• Hobbyists and developers making IoT devices, sensor systems, home automation, wearable or embedded-IoT products.

• Engineers needing a flexible, Wi-Fi + BLE + MCU + many I/O dev board — useful in prototyping embedded firmware, edge-computing, or connected devices.

• People who need a “step-up” from simpler boards (like basic microcontrollers) but don’t yet need a full-blown SBC (single-board computer).

If you want something simpler / cheaper / lower-spec:

• For very simple microcontroller-only tasks or battery-powered tiny gadgets, some smaller/less powerful board (or other variants in ESP32-S3 family) may suffice — cheaper and lower power.